1
I Use This!
Activity Not Available

Commits : Listings

Analyzed 12 months ago. based on code collected 12 months ago.
Jan 17, 2023 — Jan 17, 2024
Commit Message Contributor Files Modified Lines Added Lines Removed Code Location Date
ENGR00229708 [MX6SL] Fix all build warnings. More... about 12 years ago
ENGR00229665 pxp: correct crop setting More... about 12 years ago
ENGR00229695 MX6x-Set RBC counters correctly in STOP mode. More... about 12 years ago
ENGR00229473 elcdif fb: fix lcd framebuffer potential recursive locking More... over 12 years ago
ENGR00229470-2 MX6SL-Add support for debug UART to be sourced from 24MHz. More... over 12 years ago
ENGR00229470-1 MX6SL-Add support for debug UART to be sourced from 24MHz. More... over 12 years ago
ENGR00229464 MX6SL-Update the SOC voltages based on datasheet More... over 12 years ago
ENGR00229291 EPDC: MX6: Treat fully-collided VOID update as a collision More... over 12 years ago
ENGR00229437 [MX6SL] Fix AHB clock not changed to 3MHz in IDLE mode More... over 12 years ago
ENGR00227728 csi/v4l: add V4L2_CAP_VIDEO_CAPTURE & V4L2_CAP_STREAMING capability More... over 12 years ago
ENGR00229441 MX6SL-Reset MMDC read FIFO in low power IDLE More... over 12 years ago
ENGR00229354 Mx6 USB device: fix wrong handle for invalid USB_FEATURE requests More... over 12 years ago
ENGR00229338: usb: fix using lock before initialization problem More... over 12 years ago
ENGR00229327: otp: driver causes warning when enable CONFIG_LOCKDEP More... over 12 years ago
ENGR00229299 [MX6SL] Kernel cannot boot if enable LOCKDEP More... over 12 years ago
ENGR00229222 mmc: esdhc: allow MMC and SDIO cards switched to 1.8V signalling More... over 12 years ago
ENGR00227890 ts: fix elan touch screen gets no response upon suspend/resume More... over 12 years ago
ENGR00227873-2 mx6sl: enable pxp v4l2 option in defconfig More... over 12 years ago
ENGR00227726 csi: Disable csi clock when it's inactive More... over 12 years ago
ENGR00227873-1 pxp/v4l2: make the v4l2 output device index auto assigned More... over 12 years ago
ENGR00229290 EPDC: MX6: Adjust number of LUTs for 5-bit waveform More... over 12 years ago
ENGR00227477 mx6qdl: system resume fail due to DDR not accessable More... over 12 years ago
ENGR00227425 mx6sl: Need to save all registers before calling C function More... over 12 years ago
ENGR00227568 elcdif: fix fb wait for vsync timeout when suspend and resume More... over 12 years ago
ENGR00227502-2 mx6sl: add csi v4l2 platform device More... over 12 years ago
ENGR00227502-1 csi/v4l2: Implement probe and remove function for csi v4l2 driver More... over 12 years ago
ENGR00220469 mmc: sdio: claim host on suspend and release on resuming More... over 12 years ago
ENGR00227420 mmc: sdhci: shorten the delay on disabling clk More... over 12 years ago
ENGR00225700: ARM: mx6sl: Fix suspend/resume lockup More... over 12 years ago
ENGR00227422: ARM: imx6sl: Adjust ARM and SOC stby voltages More... over 12 years ago